测井解释（Log interpretation）.docVIP

测井解释（Log interpretation） 1 evaluation reservoir is the basic parameter ? ? ?; ? ? porosity, permeability, saturation 2 in the common elements of sedimentary rocks, H is the best deceleration agent for fast neutrons, while the floating effect of rock on thermal neutron is mainly determined by CL in rock 3, the interaction of neutron with matter mainly includes elastic scattering, inelastic scattering, floating and so on The results of 4 deep lateral, shallow lateral and micro lateral measurements are the resistivity of the original formation, the wash zone and the over band, respectively 5 the greater the formation density is, the faster the sound wave propagates in the stratum, and the time difference of the acoustic wave is smaller 6 the main radionuclides in rocks are U, TH and K, etc. the natural radioactivity of sedimentary rocks is mainly determined by the content of shale in rocks 7 gamma radiation produced by decay of radionuclides during radiation can produce photoelectric effects, Compton effects, and electron pair effects 8 micro electrode logging is composed of micro potential and micro gradient, and the permeability layer is characterized by RLMLR2ML. on the microelectrode curve 9 according to the maximum value of the Ra curve measured by the bottom gradient electrode system, the bottom interface of the formation can be divided 10 the relationship between oil saturation So and water saturation Sw is So+Sw=1. 11, the two important characteristics of hydrocarbon reservoir are porosity and permeability 13, in the M - 2 intersection, used to determine the lithology of the formation 14, on the rapid and intuitive display diagram, the phi ? - Phi XO represents the residual oil porosity; Phi XO - Phi w represents ? the movable oil porosity, Phi Phi w represents ? oil-bearing porosity 15, the mudstone baseline, formation permeability can be SP to the positive or negative direction deflection, it mainly depends on the RW and RMF of the relative degree of minerali