乙烯-醋酸乙烯酯共聚物(eva)类热熔胶粘剂（Ethylene vinyl acetate copolymer (EVA) type hot melt adhesive）.doc

乙烯-醋酸乙烯酯共聚物(eva)类热熔胶粘剂（Ethylene vinyl acetate copolymer (EVA) type hot melt adhesive） Ethylene vinyl acetate copolymer (EVA) type hot melt adhesive Characteristics and application of EVA type hot melt adhesive Polyethylene vinyl type (EVA) hot melt adhesive is EVA as a kind of hot-melt adhesive, it is a variety of late 1960s and early 70s developed, compared with other polymer binders, EVA has strong adhesion, good adhesive toughness, weatherability, easy and various additives mixed the characteristics of low price etc.. Great properties affect the mole ratio of copolymer of ethylene vinyl acetate and EVA resin material, vinyl acetate, high solid content, adhesion, toughness, resin permeability, cold resistance and high softening point, hardness, resistance is low, often used in ethyl acetate mass fraction of 20% ~ 35% EVA as the heat melt. EVA hot melt adhesive is currently the largest amount of hot melt adhesive varieties, the utility model has the advantages of strong adhesion, adhesive film with high strength and good toughness, heat resistance, cold resistance and can meet the requirements of the application, and other additives have good compatibility, extensive adhesion of many different kinds of substrates, low melt viscosity, easy sizing the price is suitable. Can be used in bookbinding, wood processing, plywood production, packaging, cans, shoemaking, automation, paper products processing, construction industry, electrical parts, vehicle parts etc.. Two, EVA type hot melt adhesive formula composition EVA hot melt adhesive is mainly made up of the following four components: EVA resin, reinforcing resin, wax and antioxidant. In some cases, a small amount of filler can be added to increase the caulking and reduce the cost. The material and formulation of hot melt adhesive determine the performance and use of hot melt adhesive. It is essential to choose the right materials and design a reasonable hot melt adhesive formula for different application requirements