电工常识（Electrician common sense）.docVIP

电工常识（Electrician common sense） 1., decoration must have (strong, weak) construction plans, the completion of the completion of electrical engineering drawings. 2. electrical installation personnel should be certified. 3. wiring should be color separation, line (L) color should be unified, zero line (N) should be black, protective line (PE) must use yellow green double color. 4. plastic wire protection pipe and junction box appearance should not be damaged and deformed. 5. piping is generally 4 in charge (DN15), 6 in charge (DN20), light pipe wall thickness of 2 + 0.3mm, threading no more than 4 roots. 6. 2.5mm2 copper wire for general electric appliance. Air conditioning and other high-power appliances need to be equipped with 4mm2 or 6mm2 copper wire. 7 、 strong circuit and weak circuit are forbidden to be worn in the same casing. 8. the same indoor power, telephone, TV and other sockets should be at the same level elevation, elevation difference should be less than 5mm. 9. in the installation of lamps, lamps must be designed, installed, fixed point all fixed. 10., the ceiling of the junction box settings: where there is a need for lead, wiring parts, need to set the junction box. And no fixed wooden keel should be fixed on the top,. 11. installation hole downlight, should verify the main position of the keel, keel to avoid cut off. 12. lighting fixtures should be installed separately switch, each lighting circuit lamp should not exceed 2KW (excluding lanterns), combination lamps can be grouped control. 13. ordinary chandelier using soft wire, as its own hanging body. Only applicable to lighting quality in the following 1 kg. 1 above the lamp must use the chain, and cord force. 14., according to the location of power equipment to determine the direction of the pipeline, elevation and switch, socket position, line positioning, slotting. The depth of the wall (groove) shall be protected against the stress of the reinforcing bar, and the concealed pipeline shall not b