电焊工教材（Welders materials）.docVIP

电焊工教材（Welders materials） Welding materials 1, procedures for flammable, toxic substances and unknown container welding requirement? Answer: should take thorough cleaning or replacement of inert gas and other explosion-proof measures, and after inspection qualified to operate. 2, welding line should be how to choose? Answer: the application of insulated rubber line, prohibit the use of the metal structure of the workshop, pipe, rail or other metal lap up to do the loop line. 3, how long should the welding be done? Answer: first to spot welding, to determine the location before welding. 4. What regulations should be observed when working on the inside of the equipment or inside the container? Answer: welders should wear dry overalls and insulating shoes, and set up special care. 5. What are the regulations for the oxygen bottle device? Answer: oxygen bottle must be equipped with shockproof ring, safety helmet and pressure reducer. The relief valve shall be equipped with a safety valve. 6. What are the procedures for welding work? Answer: must be well insulated, welding machine housing must be grounded, double line operation must be. 7. What regulations should be followed when the work is completed or suspended? Answer: welding operations personnel must cut off the power supply, gas supply, detailed inspection of the scene, confirmed that no fire danger, before leaving the job site. 8, what are the regulations on procedures for welding work site? Answer: must be well ventilated, no flammable and explosive substances, all types of gas cylinders and open flame distance must be more than 10m, oxygen bottles and acetylene bottles must be more than 5m, prohibit smoking at the job site. 9. What should be done before welding? Answer: should work surface water, oil, dirt, oxides and other clean. 10. What inspection should be done before welding work? Answer: welding machine capacity, work width, should choose a reasonable welding rod and current. 11, acetylene generator must b