电能质量的国标（GB GB power quality）.docVIP

电能质量的国标（GB GB power quality） Definition and related issues of power quality The static and dynamic disturbances of voltage, current or frequency, which lead to the malfunction or misoperation of the power equipment, are collectively referred to as power quality problems. Its performance is as follows: voltage and frequency effective value change, voltage fluctuation and flicker, voltage sag, short time interruption and three-phase voltage unbalance, harmonic, transient and transient overvoltage, and amplitude of these parameters change. Electrical energy and other products are different, hair, transmission, change, distribution and use is completed at the same time, hair, transmission, change, distribution and power equipment is connected to a system. Therefore, the power quality not only depends on the hair, transmission, and distribution of these links, but also depends on the links of electricity; power quality not only depends on the hair, transmission and change with the survey design and construction and operation of these links, but also depends on the electric power survey, design, construction, run these links. If power quality is an environment, then this environment needs the coordination of all the parties, especially the power sector and all aspects, and work together to create. With the development of national economy and the improvement of peoples life, the demand for power quality is continuously improved, and the requirements for power quality standards are also increasing. In recent years, the state has issued a number of power quality standards, which basically meet the requirements of both supply and demand in the production and operation. Edit this paragraph Power quality national standard system 1, GB/T 12325-2008 power quality, supply voltage deviation 2, GB/T 15945-2008 power quality, power system frequency deviation 3, GB/T 15543-2008 power quality three-phase voltage unbalance 4, GB/T 12326-2008 power quality, voltage fluctuation and flicke