电脑的摆放位置（Computer placement）.docVIP

电脑的摆放位置（Computer placement） 1, computer placement (1) because the runtime computer will inevitably produce electromagnetic waves and magnetic fields, so it is best to place the computer in TV, recorder from farther away, this can prevent the mutual magnetic computer monitor and TV screen, exchange frequency signal interference. (2) since the computer is made up of many close electronic components, it is necessary to keep the computer in a dry place to prevent the short circuit caused by moisture. (3) the computer in the running process of CPU will emit a lot of heat, if not timely release, it may cause CPU overheating, disorder, therefore, the best place the computer in a cool ventilated place. 2, the computer shutdown order The computer will have a larger impact on the first electric powered on and off of the moment, will give the host sends interference signals cause the host to start or abnormal, therefore, should give the external equipment power in the boot, and then to the host power. However, if an individual computer first opens an external device (especially a printer), the host cannot function properly. In this case, the reverse boot sequence should be used. When switching off, you should turn off the host and then turn off the power of the external device. This prevents the parts of the host from being subjected to heavy electrical shocks. In the process of using the computer should also pay attention to the following: WINDOWS system and not arbitrarily switch must be shutdown; if it crashes, you should try to soft start, then hard start (press RESET), can not be hard shutdown (according to the power switch for a few seconds). In the process of running the computer, all kinds of equipment of the machine should not move freely, do not plug in all kinds of interface cards, and do not load and unload the signal cables between the external equipment and the main machine. If you need to make the above changes, you must do so when the power is off and the power