攀登结组技术（Climb up technology）.docVIP

攀登结组技术（Climb up technology） I. Preface This time, a lot of people in the discussion group, based on their experience, as well as the reference books (limit of mountain climbing and mountaineering manual), I write about a group of technical post, we can see Mountaineering, as an adventure, is inherently risky. No matter how stressed it is, it is impossible to completely avoid all risks. Among the possible risk factors for climbing, falling or falling into cracks is a high level of risk, which is extremely common and has serious consequences. Single climbing is the most demanding form of climbing for both ability and devotion. You have 100% freedom on a solo climb, but you have to take 100% of the possible risks. As a result, none of the top climbers known for their single climb is a mountain climber. But if you cant bear the pressure and responsibility of solo, then choose together to enjoy adventure and partners for fun, of course, we must pay attention to the two person or a few people together to climb, in addition to achieve the result we want: such as responsibility, reduce the psychological pressure, improve the safety (avoid the risk of fall or fall into the cracks), at the same time will bring the form of climbing the change (the change can affect the efficiency, and the efficiency is often very concerned about the limit points in the climb), we need to learn some techniques, such as group...... Two, group or fixed rope Modern mountain climbing originated in the Alps of France, and the word mountaineering (alpinism) was derived from the French root ALP. The alpine style of style advocates simplicity, simplicity and purity, while extreme mountain climbing takes this style to its peak. Alpine climbing means from first to last using the fair way to climb the mountain, a person (this has already been discussed, may not be suitable for you) or a group with their best ability, judgment and luck, any obstacles to deal with the mountain have, neither rely on science