模具介绍（Die introduction）.doc

模具介绍（Die introduction） Answer Continuous modulus definition 1, continuous die refers to a set of dies, in different mold positions, and at the same time to complete two or more than two processes, and finally the parts forming, and strip from the die 2. Characteristics of progressive die The continuous die has the advantages of high production efficiency, convenient feeding, good safety performance, not easy to happen safety accidents, easy to realize automation and mechanization, save manpower, but the mold structure is complex, the mold parts and components are many Two. Working process of continuous die The first step in the continuous mode material is placed inside the guide plate and the lifter guide pin fixed on the die plate, punching down contact materials with die forming, punching interaction between punch and die under the power side into the template hole, the piercing waste with the whereabouts the slider up, at this time, due to reduced pressure, under the action of the spring plate is separated from the upper plate, punch out material, at this time, due to a reduction in pressure, under the action of the spring plate and the upper splint separation punch material finished the first step out of that material after work while punching, move forward one step, by positioning or feeding machine control step size, with the decline of the upper die, the punch and die under the action of bending forming after the slider with the pick-up mode, the bending punch left die, material separation and the upper die, second day, and then the material with a forward step, to be After the finished product is formed, the material separation process is performed and the product is separated from the material strip Three, continuous die hardware parts, function, length calculation Name function Calculation method Outer guide post (sleeve) The upper and lower die guide, ensure the clearance of the upper and lower die is even and stable Outer guide post = BP+PP+SB+DB+CB+DD/2