bank（银行）.doc

bank（银行） Bank (memory) in the memory industry, Bank has at least three meanings, so be sure to pay attention to it. 1, in the SDRAM memory module, bank number indicates the number of physical memory the memory. (equivalent to line /Row) 2, Bank also indicates the number of logical repositories inside an SDRAM device. (now its usually 4 bank). 3, it also represents a DIMM or SIMM connection slot or slot group, such as bank 1 or bank A. The BANK here is the memory slot computing unit (also known as memory Library), which is the basic unit of data bus between the computer system and memory. Only plug in a BANK, the computer can boot properly. For example, on Pentiums motherboard, the 1 168 wire slots are one BANK, and the 2 72 wire slots can form a BANK, so the 72 wire memory must be paired. The reason is that the data width of the 168 line memory is 64 bits, and the 72 line memory is 32 bits. The BANK number on the motherboard BANK0 from the start, must be inserted with BANK0 to boot, after BANK1 days after the left slot upgrade memory, called the memory expansion slot. Memory chip logic BANK (double, four interleaving Technology) 1. Memory chip logic BANK In the chips internal memory, the data is in a (bit) to write a large matrix unit, each unit called CELL, as long as a specified line (Row), and then specify a column (Column), it can accurately locate a CELL, which is the basic principle of memory chips addressing the. This array is called the memory chip BANK, also known as the BANK BANK (Logical). Due to the production process, the array can not do too much, so the general memory chip is divided into several memory array to produce, that is to say there are multiple logical BANK memory chips, with the increase of chip capacity, BANK logic has also increased the number of current from 32MB to 1GB. The chips are basically 4, or 2 BANK logic design only early 16Mbit and 32Mbit chip, two 16MB chips such as Samsung: K4S161622D (512K x 16Bit x 2 BANK) and K4S160822DT (