无法访问局域网电脑（Cannot access LAN computer）.docVIP

无法访问局域网电脑（Cannot access LAN computer） There is no access between LANs Lan - unable to access the network neighborhood solutions - LAN cannot access the network neighborhood solution to install the WindowsXP computer in the LAN can access each other and install the Windows98 computer, install the WindowsXP computer with WindowsXP installed computer is not mutual communication. In the workstation to access the server, workstation network neighborhood can be seen in the name of the server, but after clicking but cannot see any shared content, or unable to access the network size, etc.. Unable to access network neighbors 1. Check the physical connections between computers. 2. Make sure all computers are installed with TCP/IP and work properly. 3, use the ping command to test the connection between two computers in the network. 4, use the ping command to test whether the name resolution is normal in the network. 5. Install network components correctly. First, right - click the network neighbor - property, select the network card to share. Set the IP on the same segment of the lan. For example, the 192.168.1.X segment. Then look at the advanced properties of TCP/IP, and open NETBIOS. In the network system constructed by WINNT4.0, the unique identification information of each host is NetBIOS, the system is the use of WINS services, information broadcasting and Lmhost file and other modes will NetBIOS name for the corresponding IP address, so as to realize information communication. In the internal network system (that is, commonly referred to as local area networks), it is very convenient and efficient to implement information communication using the NetBIOS name. But the only identification information in the Internet of a host is the FQDN format of the domain name (163.com), in Internet to achieve the domain name for the corresponding IP address using the DNS standard WIN2K supports dynamic DNS operation, the active directory service machine can dynamically update the DN