牛仔的水洗工艺（Jeans washing process）.docVIP

牛仔的水洗工艺（Jeans washing process） Jeans washing process 2007-10-17 21:39 Jeans washing process 1, WASH (GARMENT washing) Wash that ordinary washing, but we usually familiar to washing machinery, the water temperature at 60 DEG -90 DEG C, adding some detergent, after 15 minutes or so ordinary washing, water softener and can make the fabric more soft and comfortable, more visually natural cleaner. Usually according to the length of washing time and the amount of chemicals used, Pu wash can be divided into light Pu wash, Pu wash, heavy Pu wash. Usually a light wash for 5 minutes, wash for 15 minutes or so, heavy wash for about 30 minutes, (this time is not accurate), these three kinds of method have no obvious boundaries. 2, stone wash / Stone (STONE WASH) Stone washing is to add a certain amount of pumice to the washing water, to make pumice and clothes polish, and to polish the water level in the tank, so that the pumice can be well contacted with the clothes. In the stone before can wash or rinse, can also be carried out in the stone after rinsing. According to the different requirements of customers, can be washed by Huangshi, Whitehead, AAA stone, artificial stone, rubber ball, to achieve different washing effect, after washing cloth has gray, old clothes feeling, mild to severe damage. 3, enzyme washing (ENZYME WASH) Enzyme is a kind of cellulase, it can be in a certain pH and temperature, degradation effect on fiber structure, which can be compared with the cloth gently faded, faded hair (peach skin effect), and soft effect lasting. Stone can be used or replaced by stones, and if used with stones, commonly known as WASH STONE (ENZYME stone washing). 4, sand washing (SAND WASH) Sand washing with alkaline, oxidation agent, so that after washing a fade effect and old, with stone, cloth surface will produce a layer of soft white hair cream after washing, then add some softener, can make the washed fabrics soft, soft, so as to improve the wearing comfort. (1) sand washi