电视工厂码（TV factory code）.docVIP

电视工厂码（TV factory code） Special function code 41: the program position is automatically returned to the first preselection program position after the switch on. Special function code 40: the program position before the switch is the program position before shutdown. The above special function code through the test in triumph 4C5403-8 tv. Beijing brand 2115T, 2118AT, 2122Q, 2123T, 2130T, 2132T and so on Maintenance adjustment status in factory mode: (1) operate the buttons on the remote control transmitter in the following sequence: STAND-BY--DISPLAY--P., STD--MUTE--POWER., ON (2) the use of channel (CHANNEL) and volume (VOLUME) of the (+ / -) keys to move the cursor, select one adjustable parameter. (3) applicable to all standard selection programs: DOWN or UP keys. AGC-VCO-SBT-SCT-SCR-SC-RG-GG-BG-CDL-BLU-PSL-PVS-PVA-PHS-NSR-STT (4) use volume keys to adjust the size of the parameter. Optional binary code: in the maintenance state, different optional binary codes can be set to correspond to different functions. The machines used in China are set as: BYTEO:15, BYTEO:58 Part of the brand LCD TV access to the factory menu, 2009-08-31, 07:351, Hisense TV access to engineering mode With remote control, menu, sound settings, select balance, and then enter 0532, you can enter the engineering mode, Hisense TV is so entered. 2, LG plasma into engineering mode Hold down the remote control and the menu button on the TV, and enter in a few seconds. The 4008199999 initial password is 0000. If you cant get in, call this number. Tell them the machines serial number, they help check. LG42LC2R LCD Project menu, as with his plasma TV, while holding down the remote control and host MENU, about 5-10 seconds after the emergence of. 3, PHILPS LCD TV (CRT, PDP is also common) use the time view method: (1) boot, press the remote control, 062596+ screen display, do not worry about the election screen. (2) any numeric key to enter the project menu. (3) above the first line is, 10 hexadecimal,