粘贴式木地板（Pasted wood floor）.docVIP

粘贴式木地板（Pasted wood floor） [novice on the road] Honors: 0 Experience: 3 Pasted wood floor: In the concrete structure layer, with 15 mm thick 1:3 cement mortar leveling, now mostly use polymer bond, wood floor directly paste on the ground. Solid wood flooring: Real shop type wooden floor with trapezoidal cross section basic wood joist (commonly known as wooden flute), wood joist spacing is generally 400 mm, the middle can fill some lightweight materials, to reduce the people walking empty drums, and improve the insulation effect. In order to enhance the integrity of the wood joist nail with gross floor, finally pick up or down in the gross floor wood floor adhesive. In the wooden floor at the junction of a wall, with skirting board gland. For ventilation, ventilation is allowed on the skirting board. Overhead wooden floor: The overhead wooden floor is on the ground to build sleeper wall, then install the wood joist, gross floor, floor surface. Because of the low living room height, this kind of overhead wooden floor is rarely used in family decoration. Two. The basic process of wooden floor decoration The construction method of sticking method is: Basic cleaning, brushing primer, elastic line, leveling, drilling and installation, installation of embedded parts, gross floor leveling, planing, nailing, floor leveling, planing, planing, skirting board, nail polish, paint, wax. Construction technology of strengthening composite floor: Clean the base layer, lay the plastic film mat and paste the composite floor to install the skirting board. The actual construction method is: Basic cleaning, elastic line, installation of embedded parts, drilling ground moisture, waterproof processing, installation of wooden keel, pad insulation layer, elastic line, binding, leveling, gross floor, wooden floor, planing nail leveling, planing, planing, loading, skirting, waxing, polishing paint. Three, wood flooring construction essentials Solid flooring should be installed first keel, and t