系统负载命令（System load command）.docVIP

系统负载命令（System load command） System load command.Txt why do we always add stories when were telling stories? The summer flowers, finally ended up smashed to pieces still smile, say. 7.5.3 uses the nfsstat command to view the NFS server status The nfsstat command displays statistics about the NFS and the remote procedure call (RPC) interface to the kernel, or you can use this command to re initialize the information. If no flag is specified, the default is the nfsstat -csnr command. Use this command to display each message, but no information can be re initialized. The main parameters of the nfsstat command are as follows. (1) -b: displays other statistics for the NFS V4 server. (2) C: displays only the client sides NFS and RPC information, allowing the user to view only the report of the client data. The nfsstat command provides information about the number of RPC and NFS calls sent and rejected by the client. To display only client NFS or RPC information, combine this parameter with the -n or -r parameter. (3) -d: displays information related to NFS V4 licensing. (4) -g: display RPCSEC_GSS information. (5) -m: displays the statistics of each NFS file system, the file system and server name, address, installation flag, current read and write size, and retransmission count (6) -n: display NFS information for clients and servers. To display only the NFS client or server information, combine this parameter with the -c and -s parameters. (7) -r: display RPC information. (8) -s: display server information. (9): -t display statistical information related to the conversion of NFS mapping subsystem requests to display only the NFS client or server information, -c and -sbr / Options combination. (10): -4, -n, and -c when the -s or -z parameter combination when using NFS V4 client or server will contain the information, and the existing NFS V2 and br / V3 data. (11) -z: re initialization statistics. The parameters for root users, and can display the sign after sign and those