丙烯酸环氧树脂高耐候环保型阴极电泳涂料研究(Study on acrylic acid epoxy resin with high weatherability and environment friendly cathodic electrophoretic coating).docVIP

  • 5
  • 0
  • 约1.2万字
  • 约 9页
  • 2017-10-05 发布于河南
  • 举报

丙烯酸环氧树脂高耐候环保型阴极电泳涂料研究(Study on acrylic acid epoxy resin with high weatherability and environment friendly cathodic electrophoretic coating).doc

丙烯酸环氧树脂高耐候环保型阴极电泳涂料研究(Study on acrylic acid epoxy resin with high weatherability and environment friendly cathodic electrophoretic coating)

丙烯酸环氧树脂高耐候环保型阴极电泳涂料研究(Study on acrylic acid epoxy resin with high weatherability and environment friendly cathodic electrophoretic coating) Study on acrylic acid epoxy resin with high weatherability and environment friendly cathodic electrophoretic coating Abstract: the self-made cationic acrylic epoxy resin, pigments and fillers, nano UV absorbent and light shielding agent as raw materials, preparation of LH-3001A Acrylic Epoxy Cathodic Electrodeposition Coating, the coating has good outdoor weathering resistance and salt fog resistance, can be used as one coat paint for automobile, machinery, heavy industry and so on. Keywords: cathodic electrodeposition paint; acrylic resin; nano material; bottom surface bonding paint; environmental protection electrophoretic coating 1 Introduction Cathodic electrodeposition coating can greatly improve its corrosion resistance as a primer for automobile coatings. Due to the continuous development of the market, the industry increasingly fierce competition, in order to meet the increasing automobile industry product quality, environmental protection and cost requirements, electrophoretic coating applicability, diversified correspondingly, the environment-friendly cathode electrophoretic coating with high weatherability, lead-free in Wuxi has become the development direction of the industry. By the industrys attention. LH-3001A acrylic epoxy high weather resistant cathodic electrophoretic paint developed in this paper can be used as bottom finish paint. It can optimize the process, save the cost and meet the requirements of environmental protection. 2 test section 2.1 main ingredients The main raw material: epoxy resin E-20, E-51, industrial products; methacrylic acid, methyl methacrylate, ethyl acrylate, styrene, TDI (80/20), industrial products; ethylene glycol ethyl ether, diethylene glycol ether, n-butyl alcohol, methyl isobutyl ketone, pure analysis; cross-linked resin, made two ethanol and acetic acid; analysis, pure; bismuth

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档