人造石材（Artificial stone）.docVIP

人造石材（Artificial stone） Classification according to raw materials 1. resin type artificial stone resin [1] with unsaturated polyester resin as binder, and Dali natural stone, quartz sand, calcite, limestone or other inorganic filler according to a certain proportion, adding catalyst, curing agent, pigment and artificial stone, artificial stone The agent is processed by mixing, mixing, curing, forming, demoulding, drying and surface polishing. Using unsaturated polyester products, good gloss, bright colors, rich, Machinable, decorative effect is good, this resin viscosity is low, easy to shape, at room temperature can be cured. Molding methods are vibration molding, compression molding and extrusion molding. The artificial stone used in interior decoration is mainly resin type. 2. composite artificial stone composite artificial stone, the use of adhesives, both inorganic materials, and organic polymer materials. The making process is as follows: firstly, cement, stone powder, etc. are made into the body of the cement mortar, and then the solid body is dipped in the organic monomer so that it can be polymerized under certain conditions. For plates, the bottom uses a stable and inexpensive inorganic material, and the surface is made of polyester and marble powder. The inorganic cementing material can be made of quick hardening cement, cement, ordinary portland cement, aluminate cement, fly ash cement, slag cement and plaster of paris. Organic monomer, styrene, methyl methacrylate, available vinyl acetate, acrylonitrile, butadiene, these monomers can be used alone or in combination. The composite stone product has lower cost, but it is easy to peel or crack when it is affected by the temperature difference. 3. cement type artificial stone cement type artificial stone is cement as cementing material, natural sand and gravel particle as coarse aggregate, by compounding, mixing, pressing into steam curing, sanding and polishing after artificial stone. In the preparation pro