图幅理论面积与图斑椭球面积计算公式及要求（Fig. theoretical area and calculation formula and requirement of ellipsoid area of spot）.docVIP

图幅理论面积与图斑椭球面积计算公式及要求（Fig. theoretical area and calculation formula and requirement of ellipsoid area of spot） Data worth having From the usual study, accumulation and summary Where there is a problem, there must be some Please also criticize and correct me! Fig. theoretical area and calculation formula and requirement of ellipsoid area of spot I. calculation formula of plot theoretical area (1) In style: A- ellipsoid long semi axis (unit: m) Alpha flattening of ellipsoid B- ellipsoid, semi axis (unit: m) E = 2 (A2b2) /a2 A = 1 + 2 + e (3/6) (30/80) by 4 (35/112) has 6 (630/2304) by 8 B (1/6) = e + e (15/80) 4 (21/112) has 6 (420/2304) by 8 C = (3/80) by 4 (7/112) has 6 (180/2304) by 8 D = (1/112) has 6 (45/2304) by 8 E = (5/2304) by 8 Delta L- the difference between the contours of the East and West profiles (units: points) (B2 - B1) the latitude difference between the north and South profiles (in radians) Bm = /2 (B1B2) Two. Calculation formula of arbitrary trapezoidal area on ellipsoid (2) Where: A, B, C, D, E are constants Press down calculation: E = 2 (A2b2) /a2 A = 1 + 2 + e (3/6) (30/80) by 4 (35/112) has 6 (630/2304) by 8 B (1/6) = e + e (15/80) 4 (21/112) has 6 (420/2304) by 8 C = (3/80) by 4 (7/112) has 6 (180/2304) by 8 D = (1/112) has 6 (45/2304) by 8 E = (5/2304) by 8 Formula: a- ellipsoid, long semi axis (unit: m) B- ellipsoid, semi axis (unit: m); Delta L- block differential (in radians); (B2 - B1) - block latitude (in radians) Bm = /2 (B1B2) Three, Gauss projection inverse solution transformation () model (if the coordinates do not have the tape number) There is no need to subtract the belt number * 1000000) Longitude value (radian) of central meridian (3) In style: Formula Description: if the coordinates are in the form of no prefix prefix There is no need to subtract the number * 1000000; if the coordinate is in the band prefix format You need to subtract the tape number * 1000000 Four. Constants and ellipsoid parameters used in calculation When cal