基本维修说明（Basic maintenance instructions）.docVIP

基本维修说明（Basic maintenance instructions） LED electronic display maintenance data (chip) 2008 01 Sunday at 11:08 on the afternoon of 06, LED electronic display maintenance chip information The role of 74HC04: 6 bit inverter. Seventh feet GND, power ground. Fourteenth feet VCC, power positive. The signal is input from the A terminal, the Y end is inverting output, the A1 and the Y1 are one group, and the other is analogous. Example: A1= 1, Y1= 0, A1= 0, Y1= 1, and other group functions. The role of 74HC138: eight bit binary translation decimal decoder. Eighth feet GND, power ground. Fifteenth feet VCC, power positive, 1~3 feet, A, B, C, binary input pin. The 4~6 pin chip select signal control, only in 4, 5 feet to 0 feet 6 to 1, will be gated by A, B, C output signal control. Any other combination will not be selected, and the Y0~Y7 output will be 1. Cascade through control gating to extend it to sixteen bits. Examples: G2A=0, G2B=0, G1=1, A=1, B=0, C=0, Y0 is 0 and Y1~Y7 is 1. The role of 74HC595: LED driver chip, 8 bit shift latch. Eighth feet GND, power ground. Sixteenth feet VCC, power positive fourteenth feet DATA, serial data input, display data from this entry, must have a clock signal to move in. Thirteenth feet EN, enable the mouth, when the pin is 1, the QA~QH port is all 1, and when 0, the output of QA~QH is controlled by the input data. Twelfth feet STB, latch the mouth, when the input data in the incoming register, only the supply of a latch signal, in order to move data to the QA~QH port output. Eleventh feet CLK, the clock port, each clock signal will be moved to a data register. Tenth feet SCLR, reset port, as long as there is reset signal, the data moved in the register will be empty, the screen does not use this foot, generally connected to VCC. Ninth feet DOUT, serial data output, the data passed to the next. Fifteenth, 1~7 feet, parallel output port, that is, the driver output, driving LED. 4953 function: line drive tube, power tube. The interior is