塑料特性.（Plastic properties）.docVIP

塑料特性.（Plastic properties） 1. light weight plastic is lighter material with relative density between 0.90 - 2.2. Obviously, can plastics float onto the surface of the water? Especially for foamed plastics, because of the micropores, the texture is lighter and the relative density is only 0.01. This property allows plastics to be used in products that require less weight. 2., excellent chemical stability, the vast majority of plastic on acid, alkali and other chemical substances have good corrosion resistance. Especially, commonly known as king of plastic polytetrafluoroethylene (F4), the chemical stability is even better than gold, put in the aqua for more than ten hours do not deteriorate. Because of its excellent chemical stability, F4 is an ideal corrosion resistant material. For example, F4 can be used as a material for conveying corrosive and viscous liquid pipes. 3. excellent electrical insulation performance, ordinary plastic is a bad conductor of electricity, its surface resistance and volume resistance is very large, with figures that can reach 109, 1018 ohms. The breakdown voltage is large and the dielectric loss tangent is very small. Therefore, plastics are widely used in the electronic and mechanical industries. Such as plastic insulated control cables. A poor conductor of heat with 4., noise elimination, damping effect in general, the thermal conductivity of plastics is relatively low, the equivalent of 1/75 steel 1/225 containing gas foam in porous media, the heat insulation, sound insulation, shockproof better. For example, the thermal conductivity of polyvinyl chloride (PVC) is only 1/357 of steel and 1/1250 of aluminum. In the heat insulating ability, single glass window than single glass windows 40%, double glass high 50%. After the plastic form and the hollow glass are combined, the utility model can be used in the house, the office building, the sickroom and the guesthouse. The utility model has the advantages of saving the heating in winter and