建筑结构类型（Building structure type）.docVIP

建筑结构类型（Building structure type） Building structure type Building structure type Housing structure generally refers to the structure of its load-bearing structure and enclosure structure of two parts. Before the building is built, the structure type is determined according to the number of layers, the cost and the construction of the building. The durability, seismic performance, safety and space use performance of the houses with different structures are different. The common housing structures include brick concrete structure, reinforced concrete structure, steel structure and so on. All kinds of structures have their own characteristics. Brick concrete structure is to sell Italy, brick and concrete structure. Because the brick production can use local materials, so the cost of housing is relatively low. But the mechanical performance of brick is poor, the bearing capacity is small, and the seismic performance of the building is not good. In the design of the ring beam, structural columns and other measures can improve the seismic performance of the housing, but in general can only be built below 7 houses. Brick concrete structure of the housing wall thickness is generally 370 mm or 240 mm, occupying the use of housing area, so that the effective use of housing smaller. In addition many floor brick structure housing the prestressed hollow floor, the room room can not be too large, otherwise, the floor will affect the use of Rao, and beautiful, and will use made some psychological pressure. Although many slabs of brick concrete structures are now fully reinforced concrete, the width of the masonry structure can not be designed too much because of the overall seismic performance of the brick concrete structure. Brick and concrete buildings are limited by the structure, space layout is not flexible, and can not be as flexible as the frame structure. The users can flexibly partition the space according to their own needs. It is customary to call 370 mm thick walls 37 w