数控加工程序（NC machining program）.docVIP

数控加工程序（NC machining program） Cutting depth of 2mm) N6 M05 (spindle stop) N7 M30 (main program end and reset) Example 6.G92 thread cutting cycle instruction programming (blank shape has been completed) FUNAC NC programming as follows: O9006 N1 G00 X35 Z104 N2 M03 S300 (spindle to 300r/min) N3, G92, X29.2, Z18.5, F3 (the first cycle of cutting thread, cutting depth 0.8mm) N4 X28.6 (second times cutting thread, cutting depth 0.4mm) N5 X28.2 (third times cutting thread, cutting depth 0.4mm) N6 X28.04 (fourth times cutting thread, cutting depth 0.16mm) N7 M30 (spindle stop, main program end and res