混凝土技术交底（Concrete technical disclosure）.docVIP

混凝土技术交底（Concrete technical disclosure） Add bookmarks to skip to the bottom of concrete technical disclosure, this article is contributed by 1191290393 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Technical disclosure 20XX, x, x, the name of the project, the site, the name of the construction unit, concrete pouring, Lu JJ - 005 - 00x Summary: concrete pouring related materials, construction machinery, construction process, quality requirements, safety requirements. Engineering quantity 1, engineering quantity: pouring quantity is x m3. Planning cycle: plan X days to complete the process. Two, the plan period: three materials and equipment, materials and equipments: mixer, pump, pervibrator, shovel, wood trowel, iron trowel, rubber shoes, gloves etc.. Operation process: four, operation process: process: on-site mixing, conveying the concrete vibration - leveling, precausions - rolling, picking - maintenance - product protection. 1, shear wall, wall column, independent column concrete pouring: first, pouring column, wall concrete must be watered wet construction joints at the concrete surface, but the surface can not have water, in order to ensure the combination of solid. When pouring, use the same stone mortar with the same proportion for mortar, the thickness is 5-10 cm, mortar with shovel into the mold, not allowed to use the hopper directly into the mold. The layered continuous casting, control of pouring thickness, vibration thickness should be 50cm, a pulp after the first concrete pouring 50cm and insert vibrating rod inserted into the column four column will tap root angle after built into the concrete shear wall and column pouring into 3 steps, in addition to the first step, each step of 120cm finally one step to the end of a beam, on the periphery of Ping line. After pouring, in a timely manner will be stretched out of the steel reinforcement in place, a