- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
- 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
- 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们。
- 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
- 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
简论质量流量计谐振建模与分析.doc
简论质量流量计谐振建模与分析
质量流量计谐振建模与论文导读:本论文是一篇关于质量流量计谐振建模与的优秀论文范文,对正在写有关于流量计论文的写有一定的参考和指导作用,论文片段:
质量流量计谐振建模与分析
摘要
科里奥利质量流量计是一种新型的设备,用于对流体的流量进行有效的测量。这种设备除了具有较高的准确率,能够重复测量,稳定性能好,还由于无阻流的原件及可动的部件的存在,致使其使用性能强,使用周期长,并且对于高粘度的流体以及高气压的流体都能进行测量。这种新型的流体测量设备,对原有的流体测量技术进行了优化,因此,被称为21世纪最重要的流量计。
本实验室在以往的科里奥利质量流量计的基础上,改进并自行设计研发了新型科氏流量计。本文以实验室设计的新型流量计为研究对象,建立了该流量计谐振系统的模型并加以分析。首先,分析谐振系统产生条件,建立科氏质量流量计一次仪表的传递函数模型。其次,通过对实际电路各部分的分析,仿真得到科氏流量计谐振电路的时域响应。然后,计算驱动电路各个环节的传递函数,建立起整个闭环系统的传递函数模型,在频域上分析反馈信号的幅值和相位,以验证谐振系统是否满足自激振荡条件。最后,计算谐振系统的品质因数,分析其对谐振电路选频特性的作用。
关键词:科里奥利质量流量计,谐振系统,传递函数模型
MODELING AND ANALYSIS OF MASS FLOETER
ABSTRACT
Coriolis Mass Floeter is a neeasure mass floeasure the mass floeanultaneously obtained. Coriolis Floeters not only have the good performance of accuracy, repeatability, stability, but also have high reliability and long service life for there are no blocking elements and the movable parts in the fluid pipes, so as to measure high viscosity fluids and high-pressure gas floetering is measured accurately by them. The applications of Coriolis Floeters are increasingly , chemical, metallurgy, building materials, paper, pharmaceutical, food, biotechnology, source of energy, aerospace and other industrial sectors.
Based on the former Coriolis mass floeters, our laboratory improved and developed a neeter. In this paper, the neeter laboratory is taken as a research object to establish the model of its resonator systemand then analyze. First, analyze the creation conditions of a resonator system and establish the transfer function model of the primary instrument. Secondly, through the analysis of the various parts of the actual circuit,simulate and getthe time-domain response of the resonance circuit. Then, calculate transfer function of different aspects of the driving circuit to establish the transfer function model,and analyze the amplitude and phase of the feedback signal in the frequency-domain to verify if the resonator system meets the self-oscillation conditions. F
文档评论(0)