试议机械毕业设计英文外文翻译133对降低齿轮传动装载和卸载时.docVIP

　　试议机械毕业设计英文外文翻译133对降低齿轮传动装载和卸载时 试议机械毕业设计英文外文翻译133对降低齿轮传动装载和卸载时导读：pplicationofapredesignedparabolicfunctionoftransmissionerrorsenablestoabsorbthelinearfunctionsoftransmissionerrorscausedbyerrorsofalignment,reducenoise,andavoidedgecontact.Theinfluenceoftheloadonthefunctionoftransmissionerrorsisinvestigated.Elasticdeformati 外文翻译 Reduction of noise of loaded and unloaded misaligned gear drives Faydor L. Daniele Kenji Alfonso aGear Research Center, Department of Mechanical and Industrial Engineering, University of Illinois at Chicago, 842 echanical Engineering, Polytechnic University of Cartagena, C/Doctor Fleming, s/n, 30202, Cartagena, Murcia, Spain cGear RD Group, Research and Development Center, Yamaha Motor Co., Ltd., 2500 Shingai, Iission errors are considered as the main source of vibration and noise of gear drives. The impact of tain functions of transmission errors on noise is investigated: (i) a linear one, caused by errors of alignment, and (ii) a predesigned parabolic function of transmission errors, applied for reduction of noise. It is shoission errors is aCPAnied eshing, the meshing bees a mixed one: (i) as surface-to-surface tangency, and (ii) surface-to-curve meshing ission errors enables to absorb the linear functions of transmission errors caused by errors of alignment, reduce noise, and avoid edge contact. The influence of the load on the function of transmission errors is investigated. Elastic deformations of teeth enable to reduce the maximal transmission errors in loaded gear drives. puterized simulation of meshing and contact is developed for loaded and unloaded gear drives. Numerical examples for illustration of the developed theory are provided. Keyission errors; Tooth contact analysis (TCA); Finite element analysis; Reduction of noise 1. Introduction Simulation of meshing of gear drives performed by application of tooth contact analysis (TCA) and test of gear drives have confirmed that transmission errors are the main source of vibrations