温控直流电机.docVIP

南京工程学院 自动化学院 本科毕业设计（论文） 题目： 温控直流电机的设计 专 业： 班 级： 学 号： 学生姓名： 指导教师： 起迄日期： 2013.2.20～2013.6.08 设计地点： 工程实践中心  Graduation Design (Thesis) The Design of Dc-motor Controlled by Temperature By Supervised by Lecturer School of Automation Nanjing Institute of Technology June,2013 摘 要 随着温控技术的不断发展，温控技术在越来越多的方面有了广泛的应用，已经进入了我们的工作和生活。 本论文设计完成的温控直流电机是用单片机控制温度传感器DS18B20测量温度，并选择适当的LCD显示温度，L298直流电机驱动直流电机工作，当外部温度≥45°时，直流电机加速正转，温度≥75°时全速正转；当外部温度≤10°时，电动机加速反转，温度≤0°时电动机全速反转；温度回到10°到45°之间时，电动机逐渐停止转动。 本论文重点介绍了以AT89C51单片机为核心，完成对外界环境温度信号的采集、处理、显示等功能。利用Keilc进行编程和Proteus进行仿真的联调测试。并对AT89C51芯片，L298、Proteus、Keilc、DS18B20等进行了简单的介绍。 关键词：单片机；温度控制；直流电机；传感器DS18B20 ABSTRACT With the continuous development of temperature control technology,temperature control technology has a wide range of applications in more and more,and has entered our work and life. This paper design of temperature control dc motor is complete with single-chip microcomputer control temperature sensor DS18B20 measuring temperature,And the choice of appropriate LCD display temperature, L298 dc motor driver dc-motor work,When the external temperature≥45 °, the dc motor speed up are turning. When temperature≥75 °turning at full speed,When the external temperature≤10 °, motor slowdown reversal, temperature≤0 °motor inversion at full speed, when temperature between 10 °and 45 °, motor gradually stop turning. This paper introduced the AT89C51 as the core and the completion external environment temperature signal collection, processing, display, and other functions. Use Keilc for programming and Proteus simulation test of the alignment. And a brief introduction about the AT89C51 chip、L298、ProteusKeilc、DS18B20 Key words: Single-chip microcomputer; Temperature control; Dc motor; Sensor DS18B20  目录 第一章 绪论……………………………………………………………………1 1.1 引言………………………………………………………………………… 1 1.2 选