双级时效对1933铝合金锻件组织和性能的影响-中南大学学报.PDF

42 2 () Vol.42 No.2 2011 2 Journal of Central South University (Science and Technology) Feb. 2011 1933 1,2 1,2 1,2 1,2 1,2 (1. 410083 2. 410083) 1933 T6 (110 /6 h+160 /8 h 120 /12 h+160 /6 h)3.8%1.0% 19.5%2 η 1933 TG146.2 TG113 A 1672−7207(2011)02−0342−07 Effects of two-step aging on microstructure and properties of 1933 aluminum alloy forging ZHANG Xin-ming1, 2, OU Jun1, 2, LIU Sheng-dan1, 2, XU Min1, 2, YOU Jiang-hai1,2 (1. School of Materials Science and Engineering, Central South University, Changsha 410083, China; 2. Educational Key Laboratory of Non-ferrous Metal Materials Science and Engineering, Central South University, Changsha 410083, China) Abstract: The influence of two-step aging on the mechanical properties, stress corrosion cracking resistant and microstructure of 1933 aluminum alloy forging were investigated by electrical conductivity test, ambient temperature tensile properties test, transmission electron microscopy and orthogonal test. The results show that compared with the peak aged sample, the ultimate tensile strength and yield strength of the two-step aged samples (110 /6 h+160 /8 h or 120 /12 h+160 /6 h) are decreased by 3.8% and 1.0%, respectively. Meanwhile, the conductivity is enhanced by 19.5% with an evident improvement in the stress corrosion cracking resistant. The temper