284B电站锅炉板梁质量检查表.doc

电站锅炉板梁质量检查表 beam quality inspection record form of power plant boiler 锡锅质证xi boiler qulality cer.—115 产品编号Product No.： 工作令work order No.： 产品图号Product drawing No.： 部件图号Part drawing No.： 284B74-2-24-0 序号No. 检 验 项 目test item 检 查 数 据 或 结 果 test data or result 评 定Assessment 检验员Inspector 1 母材：盖板、腹板Base material: cover, web 见证资料：材质传递卡see cer. File:material card √ ☆ 孙建明 2 焊材：焊条、焊丝、焊剂 Welding material: welding rod, welding wire, flux 见证资料：材质传递卡或焊材领用汇总表 see cer. File:material card or weld material Consuming Summary √ ☆ 孙建明 3 材料代用：母材、焊材 Material substitution: the base metal, welding 见证资料：材料代用单 无 有无代用 see cer. File: material Substitute list, Substitute or not √ 孙建明 4 技术文件Technical doc. 见证资料：相应技术文件see cer. File: Corresponding technical documents √ ☆ 孙建明 5 盖板焊接试件检验Cover plate welding Test specimen 见证资料：试件检验报告see cer. File: sample test report / ☆ 6 板梁（主梁）组合拼接 δ30、δ24 Plate beam (main beam) combination of splicing 盖：2处、腹：1处 √ 朱如栋 7 热处理Heat Treatment 见证资料：热处理记录see cer. File: Heat treatment records / ☆ 8 盖板对接焊缝外形尺寸cover plate docking seam size 30*2.2 √ 邵春荣 9 腹板对接焊缝外形尺寸web docking seam size 24*1.8 √ 朱如栋 10 盖板对接焊缝表面质量 cover plate docking seam surface quality 无缺陷 √ 邵春荣 11 腹板对接焊缝表面质量 web docking seam surface quality 无缺陷 √ 朱如栋 12 盖板与腹板角焊缝表面质量 surface quality of corner seam on cover and web 无缺陷 √ 邵春荣 13 托架角焊缝表面质量 surface quality of corner seam on bracket / / 14 盖板与腹板角焊缝外形尺寸偏差shape size tolerance of corener seam between cover plate and section 14 14.5 √ 朱如栋 15 托架角焊缝外形尺寸偏差 size Tolerance of bracket corner seam / / 16 盖板对接焊缝一次合格率 one time pass ratee of cover docking seam 见证资料：探伤报告see cer. File: detection report √ ☆ 杨建刚 17 梁的总长偏差tolerance of beam length 13560 13558、13556 √ 邵春荣 18 两端支点间尺寸偏差tolerance of both ends / / 19 梁的高度偏差tolerance of beam height 2100 2102、2100 √ 朱如栋