发动机控制回路故障模型研究-计算机系统应用.pdfVIP

计 算 机 系 统 应 用 2016 年 第 25 卷 第 4 期 发动机控制回路故障模型研究① 1 2 郑鸾凤 , 郑忠明 1(北京摩诘创新科技股份有限责任公司, 北京 100029) 2( 中国南方航空公司北京分公司, 北京 100621) 摘 要: 以CFM56-5B 涡扇发动机为研究对象, 通过需求分析对发动机控制系统进行功能模块划分和控制回路外 部接口关系的确定, 提出了发动机控制回路仿真的基本建模原则, 采用条件有向图理论和部件级建模的综合建 模方法对发动机控制回路进行了建模分析. 并采用 MATLAB/Simulink 对发动机控制回路的部件模型进行仿真, 通过模拟器的调试验证, 结果表明所建立的发动机控制回路故障模型符合模拟器仿真发动机控制系统的要求. 关键词: 发动机控制系统; 部件级建模; 条件有向图; MATLAB/Simulink 仿真 Fault Model Research of Engine Control Circuit 1 2 ZHENG Luan-Feng , ZHENG Zhong-Ming 1(Beijing Moreget Creative Technology Corporation Limited Company, Beijing 100029, China) 2(Beijing Branch of China Southern Airlines, Beijing 100621, China) Abstract: The CFM56-5B turbofan engine was discussed in this paper, functional model of engine control system and the control circuit’s external interface were defined through requirement analysis. It proposed basic modeling principle of simulation of engine control circuit. Then the conditional directed graph theory combined with assemblies modeling method was adopted to establish engine control circuit simulation model. Finally, MATLAB/Simulink was used to simulate the component model of engine control circuit. And the results show that the simulation models are accorded with the requirements of simulator engine control system through adjusting and proving. Key words: engine control system; component level modeling; conditional directed graph; MATLAB/Simulink simulation 1 引言 权限数字发动机控制系统(FADEC), 该系统不仅实现 机务维护断模拟器可以仿真飞机在空中和地面两 对发动机进行控制, 同时还监视各系统的工作状态, 种不同条件下机载电子系统的自测试、故障和航线维 当检测到故障时, 将其进行分类和存储, 同时向维护 修过程三个方面, 帮助维修人员直观学习机载电子系 人员提供必要的告警或维护信息, 维护人员根