镁合金十字杯形件温拉深成形工艺研究.pdf

《热加工工艺》 年 月第 卷 第 期 2013 1 42 1 镁合金十字杯形件温拉深成形工艺研究 曹志福， 陈 炜， 王 祥 (江苏大学 机械工程学院， 江苏 镇江 212013) 摘 要：为了研究镁合金复杂件温拉深成形性能，以Numisheet2011 中的Benchmark 2# 为例，用ABAQUS 建立了 十字杯形件的温成形有限元模型。通过热力耦合分析，得到了板料温成形过程中等效应变和应力云图、板料温度分布以 及凸模力随位移变化曲线。 并把模拟结果和标准考题试验结果进行了比较，结果吻合较好。 关键词：镁合金； 温拉深； 数值模拟； 成形性能 中图分类号： 文献标识码： 文章编号： TG316.3; TG319 A 1001-3814(2013)01-0121-03 Study on Warm Deep Drawing Process of Magnesium Alloy Cross-shaped Cup n c CAO Zhifu, CHEN Wei, WANG Xiang (School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China) . ： Abstract To research the forming property of the complex piece of magnesium alloy during warm deep drawing, taking # g Benchmark 2 (Numisheet2011) as an example, the warm forming finite element model of the cross-shaped cup was built with ABAQUS. Through the thermo-mechanical coupling analysis, the strain-effective nephogram, stress-effective nephogram and 库 r temperature distribution of the blank during the warm forming process and the curves of the punch force with stroke were o obtained. The simulation results and experimental results were compared, and they have a good accord. 例 ： gnesium alloy; warm deep drawing; numerical simulation; forming property Key words ma 案 o.