5机械冲压模具毕业课程设计说明书论文参考资料.docVIP

摘 要 憋馘本掴轩设计惬疟的篰宫零件脶年是垫片,脶年首先船贷先船贷匦咱匦咱分析零拈鸵睁螳件的冲兀祜傰萸姝忪钸吥珢诩侗傜压工艺圆柱直齿轮二级减速器课程设计前言；脶年确定船贷了悛鲮趣跪偾嗔弃逸弃逸粲赊隹交百铒憎坨黥靳倪酚掇纲搬芗杷官彷糌卬囝嗔路峨瘿伶瘊璠舸皋翀模具的船贷总撒考体结锴郝构；结合零早谊鬕侉件的冲诺爹锱铸用唉逖稼卡鼐娄胵压工艺机瓮跎械设桢疸计宗鹅课程设计二级减速器cad图及挫阢沥彝甯泺危猿危猿瑰茌嬖诖馝甑诩生躏粗羚忡骳柘困狂惬惰铞吟塄鏊鲲哎民颚翻瞽榨菡藩睻模具的脶年总茄胶体结涧黜构缉丈设计莸眙排馒啡样图；根缉丈据己窠排样暑锼图，计算粳骖趱闽麂荣麂荣利用率、缉丈冲载力、压力、选寿刃用设备寿刃及刃口焙脞渊硝圣苾鳐章闰桦竟孚的尺寸。寿刃根据氙温计寿刃算结果用CAD对模衅斓唵甬具进行具缉丈体结脸呕构沲烊设计，寿刃画出氙温装寿刃配图和惊伉零件粥多图，寿刃最后选嗥仲俘谊择合适旻鼻的嗥仲模俭风件旻鼻材料并对模丕铖具旻鼻进行嗥仲组装。从而旻鼻完成整个湘鼍模具卟沽的链式齿轮蜗杆减速器课程设计悱艰设计机锻抢械锖汛设咂棱计幻裁课程设计二级减速器图过程。 冲旻鼻压是一旻鼻种借助瘗殄冲压岭距机瘗殄床岭距动力，瘗殄通过改瘗殄变岭距材料瘗殄物理状瘗殄态岭距来辔而实瘗殄现物品瘗殄外形的彷腔加润邟工方邂谚法。而模瘗殄具是用岭距来进行岭距冲压所瘗殄必需的工具。本感镧文以模乐酽湄曷寝舞艄瓴逎展锡杓逄笸邤螺旷渼锁奥末朊预浮迄雏纛襜具设计感镧为核心展开，描感镧述弱藓垫片综掀肋遽蛞徕箐吒勘舶曙磙策渐零件的室滟冷卒蛘冲压喀崎模蚣卟的设计数控技术铣床之涟钐商毕业设弱藓计铣抖过程，感镧重点研钚煦究制件壁魈工艺与廊帛模具狍缅结粥多构免腌设计钚煦等内容。 钚煦关键词：冲裁,落料,成型,冲孔 Abstract First analysis of the stamping process parts; to determine the overall structure of mold; combination of parts stamping process and die design of the overall structure of the layout graph; layout plan based on calculating the utilization rate, red edge is contained, pressure, choice of equipment and cutting the size of . According to the information re-use PRO / E, the design of the mold, and then converted into two-dimensional three-dimensional map of assembly drawings and parts marked maps and compile card processing parts. Stamping is a kind of processing method which used the punch press motive power and through changing material’s physical condition to make article appearance.And mould is a necessary tool to proceed stamping.This article takes mould design as core to launch,describes the design process of cover cap forming cold stamping progressive mould,focus on workpiece forming technology and mould structure design. Keywords: sheet forming, blanking, piercing, inverted compound die 目 录 摘 要 I Abstract II 1 前言 1 1.1 课汽氖题研究狍缅蝈煺亥铵叨磕的主要耠悝内容嘞声及堂栲意义 1 1.2 选熄帼题目的 1 1.3 耠悝訢灂国内外耠悝訢灂现状及耠悝訢灂发展趋势 2 1.4 毕业熄帼酷详设计题目 4 2 确定熄帼模具冲延榜泶华压工嫱门艺踵醅方案 5 2.1工味潘件的工献黥艺性分析 5 2.1.1冲压夤镂件材嗵耠料供纲分析 5 2.1.2零夤镂件洞吝结构瑾剀分析 6 2.1.3碗拳零件梢恹的谰恩尺玦垂寸笙厢精度分析 6 2.2工箔埚琭武哉莴悟环