怎样写电气电子专业毕业设计外文翻译.doc

　　怎样写电气电子专业毕业设计外文翻译 怎样写电气电子专业毕业设计外文翻译__用SPMC75的PDC 导读：ACmotordoes,asotordoes.Soitisation Using PDC Timer Module 1 Speed Calculation of BLDC 1.1 Summary of BLDC Since current BLDC has substituted the electrical mutator for the mechanical one, it eliminates the disadvantages of noise, spark, electromagic disturbance, short lifetime, etc. Nople structure, dependable operation and easy maintenance as AC motor does, as otor does. So it is ers used for capture function and P operation. It also supports position detection features for Brushless-DC motor application. The PDC timers are very suitable for both mechanical speed calculation, otor included, and phase mutation for changing current conduction according to position information. Figure 1-1 sho of entire PDC timers, channel 0 and channel 1. For d 3 4 5 6 7 8 9 10 怎样写电气电子专业毕业设计外文翻译__用SPMC75的PDC 导读：e1-1.1外文翻译（原文）2外文翻译（原文）Figure1-1PDCTimersBlockDiagram1.3PDCOperationThisnotemainlydepictsPDCapplicationinmotorspeedmeasurement.FordetailedPDCintroduction,pleasereferto“SPMC75F2413AProgrammingGuide”authoredbySunplus.PDCmodulehasf etails of PDC timer’s specification, please refer to Table 1-1. 1 外文翻译（原文） 2 外文翻译（原文） Figure 1-1 PDC Timers Block Diagram 1.3 PDC Operation This note mainly depicts PDC application in motor speed measurement. For detailed PDC introduction, please refer to “SPMC75F2413A Programming Guide” authored by Sunplus. PDC module has four types of registers to perform speed measurement: Timer control register P_TMRx_Ctrl (x = 0, 1), position detection control register P_POSx_DectCtrl (x = 0, 1), input output control register P_TMRx_IOCtrl (x = 0, 1), and timer interrupt enable register P_TMRx_INT (x = 0, 1). Rx_Ctrl and P_POSx_DectCtrl are introduced in detail. 1.31Input Output Control Register 3 外文翻译（原文） Bit 15:14 SPCK: Capture input sample clock select. These bits select the capture input sample clock. Capture input pled ple clock. Pulses shorter than four sample clocks er operation modes. 0000 = Nor