哈工大机械原理大作业——凸轮——9号.docVIP

凸轮机构运动分析 班 级： 设 计 者： 学 号： 指导教师： 设计时间：  源代码 Public r0, e, h, f, ff, w As Double Public f0, fs, f01, fs1 As Double Public s, v, a, x, y, x1, y1, q1, q2, rr As Double Public pi, pa, T, s0, i As Double Public dsdf, dxdf, dydf As Double Private Sub pushcos() s = h / 2 * (1 - Cos(pi / f0 * f)) v = pi * h * w / 2 / f0 * Sin(pi / f0 * f) a = pi ^ 2 * h * w ^ 2 / 2 / f0 ^ 2 * Cos(pi / f0 * f) dsdf = h / 2 * Sin(pi / f0 * f) * pi / f0 End Sub Private Sub backsin() T = f - (f0 + fs) s = h * (1 - T / f01 + Sin(2 * pi / f01 * T) / 2 / pi) v = -h * w / f01 * (1 - Cos(2 * pi / f01 * T)) a = -2 * pi * h * w ^ 2 / f01 ^ 2 * Sin(2 * pi / f01 * T) dsdf = h * (-1 / f01 + Cos(2 * pi / f01 * T) / f01) End Sub Private Sub pushstay() s = h v = 0 a = 0 dsdf = 0 End Sub Private Sub backstay() s = 0 v = 0 a = 0 dsdf = 0 End Sub Private Sub pushaa() End Sub Private Sub backcos() End Sub Private Sub Command1_Click() Picture1.Cls Picture1.Scale (-30, 100)-(390, -20) Picture1.Line (-30, 0)-(390, 0) Picture1.Line (0, 390)-(0, -20) For i = 0 To 360 Step 30 Picture1.Line (i, 2)-(i, 0) Picture1.CurrentX = i - 10: Picture1.CurrentY = 0 Picture1.Print i Next i For i = 10 To 100 Step 10 Picture1.Line (0, i)-(5, i) Picture1.CurrentX = -30: Picture1.CurrentY = i + 2 Picture1.Print i Next i For ff = 0 To 360 Step 0.1 f = ff * pa s0 = Sqr(r0 ^ 2 - e ^ 2) If f f0 Then Call pushcos ElseIf f = f0 And f fs + f0 Then Call pushstay ElseIf f = fs + f0 And f fs + f0 + f01 Then Call backsin ElseIf f = fs + f0 + f01 And f = 2 * pi Then Call backstay End If Picture1.PSet (ff, s) Next ff End Sub Private Sub Command2_Click() Picture1.Cls Picture1.Scale (-30, 150)-(390, -150) Picture1.Line (-30, 0)-(390, 0) Picture1.Line (0, 390)-(0, -150) For i = 0 To 360 Step 30 Picture1.Line (i, 0.5)-(i, 0) Picture1.CurrentX = i - 10: Picture1.CurrentY = 0 Picture1.Print i Next i For i = -150 To 150 Step 10 Picture1.Line (0, i)-(5, i)