材料力学课堂教学软件（英文版）-范钦珊-Strength of Materials－6.pptVIP

? Superposition Method in Engineering ? The second kind of the method of superposition Example 3 ? Superposition Method in Engineering ? The second kind of the method of superposition The second kind of the Superposition methodis used to the beam subjected to discontinuously distributed loading. For the cantilever beam loaded as shown, q、l、EI are known, determine the deflection wC and the slope ?C at the point C . Solution：1. Loading Superposition The given loading may be obtained by superposing two uniformly distributed loadings:one of them is along the entire length of the beam downward, other one acts on the segment AB of the beam upward. ? Superposition Method in Engineering ? The second kind of the method of superposition Example 3 ? Superposition Method in Engineering ? The second kind of the method of superposition Solution：2. Solving the beam subjected to superposed loadings into two simple cases. In these cases the deflections and slopes can be found from the tables of deflection of cantilever. Example 3 For the uniformly distributed loading along the entire length of the beam,we find Solution：3．Determine the deflection and slope of the beam subjected to the original given loading. ? Superposition Method in Engineering ? The second kind of the method of superposition For the uniformly distributed loading over the segment AB of the beam,we have Example 3 Solution：4．Final results ? Superposition Method in Engineering ? The second kind of the method of superposition By adding algebraically the results of two loading conditions, we get the deflection and slope at the point C respectively: Example 3 ? Superposition Method in Engineering ? The third kind of the method of superposition ? To determine the deflection and slope of the beam in skew-bending, we would like to solve the external force FP into two components Fpy and FPz along