[学士]武广高速铁路客运专线某隧道设计secret.docVIP

武广高速铁路客运专线XX段部分隧道设计 摘要 国内建设线路里程最长、技术标准最高的标准客运专线——武广客运专线XX隧道，隧道全长10115米。隧道穿越市区建筑物、立交桥等市政设施，具有复杂环境条件下城市地铁隧道工程特点。 根据该工程特殊地质情况与大断面XX隧道的特点，对隧道V、VI级围岩下的支护结构、各种围岩条件下的施工方法、监测、洞门等进行设计。本隧道采用全封闭防水型衬砌结构，利用ANSYS软件，根据隧道埋深与地质的情况，得出隧道在城市地下段二次衬砌中的受力与变形进行验算，并得出验算结果。 关键词：高速铁路隧道；结构验算；温氏假定  Part Of The Tunnel Design Of In Wuhan-Guangzhou High-Speed Rail Passenger Line In XX ABSTRACT This in the domestic construction milestone in the longest lines, technical standards, the highest standards of passenger green - green-wide passenger—XXX tunnel, The total length of this tunnel is10,115 meters. Tunnel pass through the urban buildings and flyovers, and other municipal facilities. This project characteristics has the complex environment under the conditions of urban subway tunnel. According to the special geological conditions and engineering large section of the Liuyang River Tunnel features, many things had been designed, such as the rock-supporting structure under the V-VI of the tunnel, the construction methods in all kinds of rock under the conditions, monitoring and so on. The tunnel was closed by the whole structure of water-resistant lining. According to the depth and geological condition of the tunnel, the forces and deformations of the 2nd lining for the obtained tunnel had been calculated, by the using of ANSYS software. Key words: high-speed railway tunnel; structure checking calculation; Wen’s assumption;  １ 隧道概况 1.1工程概况 1.1.1隧道工程位置 XX隧道位于XX市东部，捞刀河以南，止于黎托乡平阳村。线路从星沙镇至彭家港的潇湘路附近起，隧道下穿星沙镇物流场、京珠高速公路、长永高速、星沙镇市区、XX市远大路、人民东路、XX、机场高速公路，于黎托乡平阳村出地面。自北向南依次穿过XX市开福区捞刀河镇、芙蓉区东岸乡、雨花区黎托乡等。 1.1.2隧道建设规模 XX隧道工程范围10115m，暗洞段长9935m，全隧道共设置三座竖井及一座斜井，隧道建设规模见下表1-1 表1-1 XX隧道建设规模表 类别 里程 长度 （m） 备注 起始里程 终止里程 隧道建筑长度 DIIK1560+785 DIIK1570+900 10115 隧道长度 DIIK1560+785 DIIK1570+720 9935 分 段 情 况 进口明挖暗埋段 DIIK1560+785 DIIK1560+914 129 洞身暗挖段 DIIK1560+914 DIIK1561+500 586 洞身明挖暗埋段 DIIK1561+500 DIIK1562+860 1360 洞身暗挖段 DIIK1562+860 DIIK1569+650 6790 DIIK1568+666- DIIK1569+028段下穿XX 出口明挖暗埋段 DIIK1569