基于flexsim对某医药物流中心立体仓库优化-包装工程.pdfVIP

包 装 工 程 第38 卷 第7 期 ·210 · PACKAGING ENGINEERING 2017 年4 月 论坛 基于 Flexsim 对某医药物流中心立体仓库优化 杨玮，罗洋洋，杨甜，岳婷，刘江 （陕西科技大学，西安 710021 ） 摘要： 目的 利用 Flexsim 软件仿真医药物流中心立体仓库的运作，缩短立体仓库出入库作业时间，优 化运作过程人员与设备的组合。方法 以某大型医药物流中心为研究对象，根据实际立体仓库的布局， 使用 Flexsim 仿真软件进行建模仿真时，首先采用遗传算法确定最优的出入库顺序，将结果在 Flexsim 中仿真运行，证明算法用于出入库仿真的实用性；然后对立体仓库整体流程进行仿真。结果 优化后的 流程，出入库作业效率提高了 12.4%，确立了仓储作业在(2,2,2,2)配置下，实现了人员设备的最优利用。 结论 采用建模仿真的方法，找出了流程中的瓶颈，确认了最优出入库作业顺序，以及人员、设备组合， 提高了医药物流中心的出入库效率，降低了设备、人员等成本。 关键词：Flexsim ；医药物流；立体仓库；仿真优化 中图分类号：F252.13 文献标识码：A 文章编号： 1001-3563(2017)07-0210-06 Optimization of Stereoscopic Warehouse in a Pharmaceutical Logistics Center Based on Flexsim YANG Wei, LUO Yang-yang , YANG Tian, YUE Ting, LIU Jiang (Shaanxi University of Science Technology, Xian 710021, China) ABSTRACT: The work aims to simulate the operations of stereoscopic warehouse of pharmaceutical logistics center with Flexsim, in order to shorten the time of out-put and in-put warehousing of stereoscopic warehouse and optimize the com- bination of personnel and equipment during the operation. Taking a large-scaled pharmaceutical logistics center as the research object, according to the actual layout of stereoscopic warehouse, a simulation model was built with Flexsim si- mulation software. First, genetic algorithm was used to determine the optimal out-put and in-put sequence, and the results were simulated in the Flexsim which could prove the practicability of the algorithm. Then, the whole process of stereos- copic warehouse was simulated. The efficiency of out-put and in-put warehousing was imp