毕业设计源代码.docVIP

#includereg52.h #define uchar unsigned char #define uint unsigned int sbit closeDoor = P3^7; //关门控制定义 sbit openDoor = P3^4; //开门控制定义 sbit speaker = P2^5; //蜂鸣器定义 sbit firstFloor = P2^0; //第一层按键呼叫 sbit secondFloor = P2^1; //第一层按键呼叫 sbit thirdFloor = P2^2; //第一层按键呼叫 sbit fourthFloor = P2^3; //第一层按键呼叫 sbit LED0 = P2^6; //方向指示LED sbit LED1 = P0^0; //方向指示LED sbit LED2 = P0^1; //方向指示LED sbit LED3 = P0^2; //方向指示LED sbit LED4 = P0^3; //方向指示LED sbit LED5 = P0^4; //方向指示LED sbit LED6 = P0^5; //方向指示LED sbit LED7 = P0^6; //方向指示LED sbit LED8 = P0^7; //方向指示LED sbit LED9 = P2^7; //方向指示LED uchar nowFloor=1;//电梯所在的层 uchar Tab[]={0x41,0x7B,0xC2,0x52,0x78,0x54,0x44,0x73, 0x40,0x50,0x60,0x4C,0xC5,0x4A,0xC4,0xE4}; bit first_Floor=0; //电梯呼叫层1 bit second_Floor=0; //电梯呼叫层2 bit third_Floor=0; //电梯呼叫层3 bit fourth_Floor=0; //电梯呼叫层4 void Delay(uint t) { uchar i; while(t--) { for(i=0;i200;i++) { if(firstFloor==0) //电梯呼叫层1 first_Floor=1; if(secondFloor==0) //电梯呼叫层2 second_Floor=1; if(thirdFloor==0) //电梯呼叫层3 third_Floor=1; if(fourthFloor==0) //电梯呼叫层4 fourth_Floor=1; closeDoor=~openDoor; //关门和开门状态相反 P1=Tab[nowFloor];//电梯在一楼等待 } } } void Upward(uchar t) //电梯上行指示LED { uchar i; for(i=0;it;i++) { LED9=0; LED1=LED2=LED3=LED4=LED5=LED6=LED7=LED8=LED0=1; Delay(10); LED8=0; LED1=LED2=LED3=LED4=LED5=LED6=LED7=LED0=LED9=1; Delay(10); LED7=0; LED1=LED2=LED3=LED4=LED5=LED6=LED0=LED8=LED9=1; Delay(10); LED6=0; LED1=LED2=LED3=LED4=LED5=LED0=LED7=LED8=LED9=1; Delay(10); LED5=0; LED1=LED2=LED3=LED4=LED0=LED6=LED7=LED8=LED9=1; Delay(10); LED4=0; LED1=LED2=LED3=LED0=LED5=LED6=LED7=LED8=LED9=1; Delay(10); LED3=0; LED1=LED2=LED0=LED4=LED5=LED6=LED7=LED8=LED9=1; Delay(10); LED2=0; LED1=LED0=LED3=LED4=LED5=LED6=LED7=LED8=LED9=1; Delay(10); LED1=0; LED0=LED2=LED3=LED4=LED5=LED6=LED7=LED8=