ECCC 34连铸工艺中质点集散的过程参数的影响.pdfVIP

Mould lubrication Session 18 1 Influences of process parameters on Keywords the particle separation and distribu- tundish, separation rate, water model study, CFD- tion in continuous casting processes simulation, steel cleanliness Authors Introduction Rückert, A.; Wuppermann, C.; Pfeifer, H. A continuous casting facility primarily consists of the ladle turret, several steel ladles, tundish and oscillat- RWTH Aachen University, Department for Industrial ing mould with lower rolls to support the strand. The Furnaces and Heat Engineering secondary metallurgy (degassing, de-oxidation, alloy- ing, temperature and cleanliness adjustment) running in the ladle is a discontinuous process, whereas the Contact Data solidification of the steel melt in the mould is a con- tinuous process. The tundish links the discontinuous Antje Rückert, RWTH Aachen University, Department process of secondary metallurgy with the continuous for Industrial Furnaces and Heat Engineering, Koper- casting process. It serves as a steel melt buffer dur- nikusstraße 10, 52074 Aachen, phone: +49 (0)241- ing the ladle change, distributes the steel melt to 80-26060, fax: +49 (0)241-80-22289