蒸馏水机纯蒸汽发生器.pptVIP

纯蒸汽发生器故障分析 代码 故障原因 解决措施 PAL30-6 Compressed air low pressure 压缩空气压力过低 1. Check the line pressure and the availability of compressed air. 1. Verify the opening of the interception valve. 2. Verify the right working of the pressure switch PS30-6, and that the set value is not too high. 1. 检查管路压力和压缩空气的利用率 2. 检验截流阀事都开启 3. 检验压力阀PS30-6是否正常工作以及阀的设置是否太高 IAH09-1 Feed water pump motor overload 给水泵电机过载 1. Verify the rotation direction of the pump. 1. Verify and eliminate eventual air inside the pump body through the vent valve. 2. Check the pump motor amperage and the magneto-thermal switch se