通管注塑工艺分析和模具设计.doc

摘 要 三通管作为一种连接件在日常生活中应用广泛，本文对塑料模具的设计方法及过程进行了阐述。通过用Moldflow模拟对其工艺分析，确立了合理的成型工艺参数。设计了三通管塑料模具中的各个系统如注射系统、温度调节系统、导向与定位机构、侧向分型与抽芯机构、脱模机构、分型面及排气槽。并对塑件的材料性能进行了分析。 关键词：三通管 注塑模 导向 分型 脱模 顶出 ABSTRACT The Three Links Pipeline as a kind of attachment is widely used in daily life. In the paper, the design method and processes of the plastics mould have been described. In design, some parts of plastics mould have been designed, such as: injecting system, temperature-control system, director, joint face, pushing off system, mould unloading system, air evacuation groove. And material function of the plas