大学课程设计撰写(参考范文).docVIP

 PAGE 17 基于CPLD的放电加工机脉冲电源的设计 摘 要 本文给出了在模具行业中放电加工机脉冲电源控制部分的原理及硬件、软件设计，基于ALTERA公司生产的EPM1270T144C5可编程逻辑器件CPLD，利用ALTERA公司的Quartus ‖硬件设计软件，采用Verilog HDL硬体语言设计控制时序、功能键操作、数字键操作、数码管显示系统等，简化了电路的设计和IC芯片的使用，很好的解决了电路复杂、元器件所占体积大、抗干扰能力差、适时控制等问题，大大提高了系统的整体性能。解决了电火花加工机在恶劣的生产条件下脉冲电源丢失、丢步、间歇放电、脉冲电源的脉宽及休止的变化等问题，提高了电火花加工机的性能和加工中的稳定性、生产效率和电极原材料的损耗等加工工艺问题。 关键词： 放电加加工机 EPM1270T144C5 CPLD Verilog HDL Quartus ‖ 脉宽 休止 Abstract In this paper, in the mold industry EDM pulse power supply control part of the theory and hardware, software design, based on the ALTERA company EPM1270T144C5 programmable logic device CPLD, using ALTERAs Quartus ‖ software, hardware design, using Verilog HDL hardware body language designed to control timing, function key operation, the number of key operations, such as digital display system, simplifying the circuit design and the use of IC chips, a very good solution to the circuit complexity of the share volume of components, and anti-jamming capability timely control and other issues, greatly improving the overall performance of the system. Solve the EDM machine production in adverse conditions, pulse power loss, lost step, intermittent discharge, pulse power and the rest of the changes in pulse width and so on, to improve the performance of EDM machines in the Stability and processing, production efficiency and electrode wear and tear, such as raw materials processing issues.    Key words: Discharge increases machine EPM1270T144C5 CPLD Verilog HDL  Quartus ‖ resting pulse width 目 录 摘要Ⅰ AbstractⅡ  HYPERLINK \l _Toc16431 放电加工机脉冲电源概况..1 1.1 引言1  HYPERLINK \l _Toc21334 1.2 现阶段火花机脉冲电源状况和发展趋势．1 1.3 脉冲电源的设计结构和概述1 第二章 EDA、CPLD、Verilog HDL 、Quartus ‖概述．.．．．．．．．．.2 2.1 EDA技术的发展和优点．．．．．．．．．．．．．．．．．．2 2.2 ALTERA公司生产的EPM1270T144C5 CPLD概述2 2.3 Quartus ‖应用软件介绍 ．4 放电加工机脉冲电源设计流程．．．．5 3.1 设计方案的规划和论证5 3.2 脉冲电源总体设计流程5 放电加工机脉冲电源软件设计14 4.1 软件设计总流程图14 4.2 子程式结构流程图15 4.2.1 键盘子程式流程图