TiO 2 对高钛钒钛磁铁烧结矿性能的影响.pdfVIP

  • 15
  • 0
  • 约2.82万字
  • 约 9页
  • 2017-11-13 发布于浙江
  • 举报

TiO 2 对高钛钒钛磁铁烧结矿性能的影响.pdf

TiO 对高钛钒钛磁铁烧结矿性能的影响 ·1 · 2 TiO 对高钛钒钛磁铁烧结矿性能的影响 2 何木光 (攀枝花钢钒有限公司炼铁厂,四川攀枝花 617024 ) 摘 要 为了探索在现有原料条件下不同 TiO 对高钛型磁铁矿烧结性能的影响,通过实验得出,在烧结矿中 TiO 2 2 含量 6%~10%内,随着TiO 含量增加,混合料初熔和熔化温度均上升,烧结矿强度和成品率下降,低温还原粉化 2 率上升,还原性降低,熔滴性能变差,贮存性能变化不大。当 TiO 含量从 6%提高到 10%时,烧结矿转鼓强度下降 2 4.69 个百分点,成品率下降 4.43 个百分点,低温还原粉化率上升 6.02 个百分点,还原度下降 3.9 个百分点,烧结 矿的平均粒径由 22.10mm 下降到 19.28mm;随着TiO2 含量增加,钛赤铁矿、铁酸钙含量减少,钛磁铁矿以及含钛 矿物钙钛矿、钛辉石、钛榴石含量增加;烧结矿的孔洞增加,矿物形态和结构变差。 关键词 TiO2 ,高钛磁铁矿,烧结,性能 Effect of TiO on High Titanium Vanadium-titanium 2 Magnetite Sinter Properties He Muguang (Panzhihua Steel Vanadium Ironmaking Plant, Panzhihua 617024, China) Abstract In order to explore the effects of high titanium magnetite sintered materials performance on TiO under different 2 conditions existing,obtained by experiment,in the sinter TiO content of 6% to 10% ,with the increase of TiO content, 2 2 early melt and mix melting temperatures wed rised,sinter strength and yield a decreased,RDI rate reducing reduce droplet poor performance ,storage performance changed little. When TiO2 increased from 6% to 10% ,the sinter tumbler strength decreased 4

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档