基于单片机的粮仓温湿度多点无线监测系统方案毕业方案.docVIP

本科毕业设计 于单片机的粮仓温湿度多点无线监测系统设计 温湿度是一个非常重要的参数。在工业、医疗、军事和生活等许多地方，都需要用到测温湿装置来监测温湿度。传统直接布线测量不能满足要求，特别是在某些环境恶劣的工业环境和户外环境，通过直接布线测量不现实。因此采用无线传输温湿度信息尤为必要。 目前有些设计能够实现无线温湿度监测，但价格过高是其最大的缺点。在实际温湿度控制过程中既要求系统具有稳定性、实时性又需要降低功耗。因此设计一种低功耗的无线温湿度监测系统很有意义。本文提出一种针对无线数据传输问题的解决方案，该方案基于nRF24L01来设计无线温湿度采集系统。该系统采用传统单片机ATmega16L和数字温湿度传感器来构成多点、实时的无线温湿度监测系统。通过简单的无线通信协议，实现可靠性与功耗平衡，该系统能实现对温湿度的监测，是可以实现远程控制的无线温湿度监测系统。 该系统利用无线通信技术构建了分布式无线传感器网络，通过传感器节点温湿度信息采集和传输，组网简单，维护方便，运行费用低等优点，能够实现可靠的无线数据传输。可以应用于大型粮仓温湿度的监测。 关键字：ATmega16 无线传输 nRF24L01Wireless Temperature and Humidity Monitoring System in Barn Shi Jianzhu (College of Engineering, South China Agricultural University, Guangzhou 510642, China) Abstract:Temperature and humidity is a very important parameter. In many places, such as the industrial, medical, and military, you need the temperature and humidity measurement device to monitor temperature and humidity. Direct wiring measurement does not meet the requirements, especially in some environments, such as, harsh industrial environments and outdoor environments. Therefore, the wireless transmission of temperature and humidity information is particularly necessary. At present, some devices can be used to monitor wireless temperature and humidity, but the price is the biggest drawback, the price is too high. The system must be stable, real-time and low power consumption in actual control. Therefore, the design of a low-power consumption wireless temperature and humidity monitoring system makes sense. This paper presents a solution for wireless data transmission, the program is based on the nRF24L01 to design the monitorint system of wireless temperature and humidity. The system uses the traditional microcontroller ATmega16 and digital temperature and humidity sensor AM2301 to form multi-point, real-time wireless temperature and humidity monitoring system. Through a simple wireless communication protocols, bring about reliability and power balance. The system is a remote wireless temperature a