CaO颗粒水合制备工艺的优化及其性能的CFBR实验研究.PDF

See discussions, stats, and author profiles for this publication at: /publication/258030570 Optimization of CaO particle preparation and performance tests in a bench scale circulating fluidized bed reactor Article in Dongli ongcheng/Power Engineering · December 2004 CITATION READS 1 8 3 authors, including: Qiang Yao Tsinghua University 319 PUBLICATIONS 2,279 CITATIONS SEE PROFILE Some of the authors of this publication are also working on these related projects: Pm2.5 from fossil fuel combustion and its control View project To study the transformation of alkali metals during thermal conversion of biomass, and try to find the effect of different experimental conditions on the release and transformation of K. View project All content following this page was uploaded by Qiang Yao on 03 August 2015. The user has requested enhancement of the downloaded file. 　 24 6 动 力 工 程 Vol. 24 No. 6　 　2004 12 POW ER EN GINEERING Dec. 2004　 　　: 1000-6761( 2004) 06-0893-04 C O CFBR 王世昌,　姚　强,　徐旭常 (; , 100084) 　: 为了降低脱硫反应产物层的扩散阻力对于 C O颗粒脱硫反应的 响,提高脱硫反应速率 和 CFB-FGD工艺中的烟气脱硫率,必须降低 C O颗粒粒径。 将分析纯 C O颗粒分别与去离子水 和 4种分散剂溶液进行水合反应并根据悬浮液分散度对脱硫剂制备工艺进行了必要的优化。 对分 析纯 C O颗粒与去离子水反应得到的 C ( O H)2 颗粒悬浮液和分析纯 C O 颗粒与0. 006mole /l的 ( 3)6 溶液反应得到的 ( )2 颗粒悬浮液分别与飞灰混合、干燥、研磨得到的脱硫剂性能在 N PO C O H 自行设计制造的小型循环流化床热态实验台( CFBR)上进行了实验研究。 实验结果表明: 在 600°C 2 ～ 800°C范围内, CFBR的烟气脱硫率达到最大值。提高 C ( O H) 悬浮液的分散度是降低 C O颗 粒覆盖层厚度和提高脱硫剂在 CFB-FGD