一种新型缝耦合多层陶瓷带通滤波器的设计.PDFVIP

一种新型缝耦合多层陶瓷带通滤波器的设计 梁飞 吕文中 白天 王晓川 （华中科技大学电子科学与技术系，武汉，430074 ） 摘 要：论文提出了一种基于缝耦合技术设计的多层陶瓷带通滤波器。四分之波长耦合带状线谐振器放置于不同的介质层上 形成交指结构，采用抽头结构实现输入输出耦合。为了降低耦合强度，在相邻谐振器间置于耦合缝。通过计算缝耦合微带线 的奇、偶模特征阻抗，推导出级间耦合系数的理论公式，其结果与电磁仿真计算结果具有良好的一致性。基于以上理论公式， 设计了一个三阶带通滤波器，并采用电磁仿真软件进行仿真，最终所设计出的滤波器具有高性能、小型化特征。 关键词：带通滤波器， LTCC ， 缝耦合 A new compact LTCC bandpass filter using slot coupling Fei Liang ，Wenzhong Lu, Tian Bai, Wang Xiaochuan (Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China) Abstract: In this paper, a new compact Low Temperature Co-fired Ceramic (LTCC) bandpass filter using slot coupling is proposed. The quarter-wavelength resonators of the bandpass filter located on different ceramic layers form interdigital configuration, and the input/output external couplings are realized by the tapped-lines. In order to reduce the coupling intensity, the slots in the partitions which locate between the adjacent resonators are introduced. The theoretical formula of the inter-coupling coefficient derived from the odd- and even-mode characteristic impedance of the coupling lines is given, which shows a good agreement with the computed result by full electromagnetic field simulation. Based on the results of this study, a three-pole bandpass filter is designed and verified by simulation, which shows a good compactness. Keywords: bandpass filter LTCC interdigital slot coupling 1 前言 整相邻层之间谐振器耦合强弱，引入了与地相连的 耦合缝，通过调节耦合缝的宽度来满足相邻层谐振 近年来，随着低温共烧陶瓷（LTCC ）技术的 器之间耦合所需的耦合量，从而满足滤波器所需要 迅猛发展，多层陶瓷滤波器因其小型化、高性能和 的性能。 低成本引起人们极大的兴趣。其中，TEM模带状线 和微带线交指型多层陶瓷带通滤波器已被广泛而 2 滤波器结构 深入的讨论[1] 。在[2，3，4]所示报道滤波器结构中， 三级缝耦合带状线带通滤波器