喷射沉积多孔材料楔形压制工艺的研究现状 与发展趋势.pdfVIP

Material Sciences 材料科学, 2015, 5(5), 201-207 Published Online September 2015 in Hans. /journal/ms /10.12677/ms.2015.55027 Status and Development Trend of Wedge Pressing Technology for Spray-Deposited Porous Materials Xian Zhang1*, Hao Zhang2 1 College of Mechanical Engineering, Huaihai Institute of Technology, Lianyungang Jiangsu 2 Changsha University, Changsha Hunan * Email: 1997000022@ th th st Received: Aug. 25 , 2015; accepted: Sep. 11 , 2015; published: Sep. 21 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract Wedge pressing is an advanced densification technology for compressing spray-deposited porous preforms of large scale by accumulating deformation as to integral forming. Densifica- tion method of spray deposited porous materials is introduced. Wedge pressing is compared with traditional compressing methods to reflect superiority and necessity of wedge pressing adopting. Principle, technical characteristics and research utilizes of wedge pressing are in- troduced separately, and limitations and development trends of this technology are analyzed. It is considered that control accuracy of temperature gradient of temperature gradient wedge pressing should be improved; compact homogeneity and compact process of ring billet should be investigated further; and compact efficiency and dimensional accuracy of tubular billet as pressed should be improved. Wedge pressing will be applied