标准加入法定值高钛渣中V2O5含量的研究.pdfVIP

Metallurgical Engineering 冶金工程, 2015, 2(3), 132-135 Published Online September 2015 in Hans. /journal/meng /10.12677/meng.2015.23019 Study on the Content of V O in High Titanium 2 5 Slag Using Standard Addition Method Fuchang Xu, Lingxian Chen, Hao Yang, Liqin Yan Yunnan New Independent Pioneer Metals Corporation, Kunming Yunnan Email: xufuchang_xu@163.com th th th Received: Aug. 8 , 2015; accepted: Aug. 28 , 2015; published: Sep. 10 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract This research aimed at impurity analysis of high titanium slag after smelting by electric furnace, and used standard addition method to measure V2O5 value in high titanium slag. At present, in domestic impurity standards of high titanium slag and V O , there is no V O standard in high tita- 2 5 2 5 nium slag standard, and V2O5 value in high titanium slag cannot be measured by XRF and ICP all the time. By analyzing a large number of samples, V2O5 value in standard samples was determined, so that V2O5 value in unknown samples (i.e., high titanium slag) was measured, applying to the new curve of XRF and ICP. The results are accurate and can meet the production requirement. Keywords High Titanium Slag, Standard Addition Method, V O 2 5 标准加入法定值高钛渣中V O 含量的研究 2 5