热量计系统设计.DOCVIP

热量计系统设计 张坤1.51.5Linan City, Zhejiang Province Technical School浙江省临安市技工学校3113001345688157015724956855浙江省临安市青年路45号hljwhzhangkun@163.com张坤（1984），男，二级实习教师，电工电子张坤zhangkun张坤 1.51.51*|*期刊*|*周立功.LPC900系列Flash单片机应用技术（上册）.北京航空航天大学出版社.2004，1-89　　 [2]. .Feixiuying.Discussion on implement of heat metering charge.Science Technology of Baotou Steel(Group) Corporation.2002，54-65 [3]. 董重成，供暖分户热量计量方法及系统设计.低温建筑技术.2000，04期. [4]. PHILIPS.RS-232 Application Note.B.B Electronics Mfg.Co.Inc. 1997，45-64 [5]. Languiting.Comparison Selection of Heat Meter for Household Heating.Shanxi Jianzhu.2003，24-27*|1|张坤|zhangkun|浙江省临安市技工学校|Linan City, Zhejiang Province Technical School|张坤（1984），男，二级实习教师，电工电子|浙江省临安市青年路45号|311300|hljwhzhangkun@163.com13456881570热量计系统设计|Calorimeter system design|（浙江省临安市技工学校） 摘要： 关键词：; 中图分类号：TB9  Calorimeter system design zhangkun (Linan City, Zhejiang Province Technical School) Abstract: Calorimeter system through the PCF8563 real time clock timer under the valve open time to count, through the microcontroller LPC932 control to achieve the purpose of billing (billing system is accurate to seconds), and liquid crystal display through the LCD timing and valve state to observe the record, in the first use of the calorimeter, the system will have 4 seconds after power is about time to wait, during which time the system was initially set for some columns and feature detection, after the test bee buzzer will beep to indicate the initial and testing completed. The default is off valve must be long until the switch valves button OPEN, the system began billing. You can use the process to check the short press the Display button to open the current usage and valve status. If you want to stop too warm to energy use in the normal length of the switch valve button until CLOS, then the valve closes to stop charging and the current state is saved to the internal microcontroller E2PROM, when once again press off valve button until OPEN, the system will retrieve the