毕业论文（设计）数控铣床主轴箱机构设计.docVIP

诚信声明 本人郑重声明：本论文及其研究工作是本人在指导教师的指导下独立完成的，在完成论文时所利用的一切资料均已在参考文献中列出。 本人签名： 年 月 日 摘要关键词：Design of spindle box mechanism for numerical control milling machine Abstract：The design by domestic and foreign CNC machine tool spindle box and electric spindle technology research, when CNC milling spindle headstock and design, to achieve the main drive belt drive. CNC milling by linear interpolation, circular interpolation or complex curves interpolated motion, plane and surface milling workpiece to achieve continuous control of CNC milling machines, eliminating the intermediate transmission link in the rated speed range achieved without level speed, spindle positioning accuracy, run more smoothly, and further improve the dynamic accuracy and dynamic stability, to extend the life of the spindle bearings. This way you can avoid the drive gear vibration and noise caused. Keywords: Mechanical design；Numerical control three coordinate milling machine；CNC system; spindle. ..............................................6 5 同步带传动设计与计算..........................................7 5.1 同步材料选择................................................7 5.2 同步带参数的计算............................................7 5.2.1 模数的选取................................................7 1 小带轮齿数....................................................8 2 同步带节距....................................................8 3 节圆直径......................................................8 4 大带轮齿数....................................................8 5 大带轮直径....................................................8 6 带的速度......................................................8 7 定中心距......................................................8 8 带的节线长度..................................................8 9 计算中心距.....................................................8 10 带轮与带的啮合齿数............................................9 11 带宽..........................................................9 12 作