锆和钛含量对铝添加高铬ODS钢氧化物粒子的影响.pdfVIP

Material Sciences 材料科学, 2017, 7(3), 413-422 Published Online May 2017 in Hans. /journal/ms /10.12677/ms.2017.73055 Effects of Zr and Ti Contents on Oxide Nanoparticles in Al-Alloyed High-Cr ODS Steels 1* 1 2 3 4 Peng Dou , Xin Zhang , Akihiko Kimura , Yuehui He , Chain-Tsuan Liu 1 School of Materials Science and Engineering, Chongqing University, Chongqing 2 Institute of Advanced Energy, Kyoto University, Kyoto 3 State Key Laboratory for Powder Metallurgy, Central South University, Changsha Hunan 4 Center for Advanced Structural Materials, Department of Mechanical and Biomedical Engineering, College of Science and Engineering, City University of Hong Kong, Hong Kong th th st Received: May 12 , 2017; accepted: May 28 , 2017; published: May 31 , 2017 Abstract In order to study the effects of zirconium and titanium contents on the nanoparticles in Al-added high-Cr ODS steels and the oxides of ODS-Zr-1 (Fe-15Cr-4Al-2W-0.15Ti-0.3Zr-0.35Y O ) which was 2 3 synthesized by mechanical alloying, have been examined by transmission electron microscopy (TEM), including diffraction contrast techniques, and high resolution transmission electron mi- croscopy (HRTEM). Relative to SOC-9 (Fe-15.5Cr-2W-0.1Ti-4Al-0.35Y O ), i.e., an Al-alloyed high-Cr 2 3 ODS steel without Zr addition, not only the dispersion morphology but also the coherency of the