极薄带钢非稳态轧制过程板形仿真研究.pdfVIP

极薄带钢非稳态轧制过程板形仿真研究 ·1 · 极薄带钢非稳态轧制过程板形仿真研究 1 2 1 张亚文刘亚军 张清东 （1. 北京科技大学机械工程学院, 北京 100083 ； 2. 宁波宝新不锈钢有限公司, 浙江宁波 315807 ） 摘 要 非稳态轧制阶段一般伴随着张力的连续变化或轧制速度的连续变化，过焊缝轧制阶段是一种典型的非稳态 轧制阶段，表现为轧制速度的连续变化。某钢铁厂某条高速冷连轧机组在过焊缝轧制时存在较为严重的板形缺陷， 针对这一问题，结合现场实际情况，选取过焊缝轧制过程中几个不同的轧制速度时刻进行分析，通过有限元软件仿 真分析了轧制速度改变对板形的影响，弯辊力改变对板形的影响，并在此基础之上提出了非稳态轧制过程中轧制速 度连续变化时板形的弯辊力补偿控制策略，为现场非稳态轧制过程中板形控制提供了依据。 关键词 非稳态，板形，仿真分析，弯辊力补偿 The Simulation Analysis about the Shape of Extremely Thin Strip in the Unsteady Rolling Stage 1 2 1 Zhang Yawen , Liu Yajun , Zhang Qingdong 1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China; （ 2. Ningbo Baoxin Stainless Steel Co., Ningbo Zhejiang 315807, China ） Abstract Generally, rolling tension or speed changesduring theunsteady rolling stage.The over weld rolling stage is one kindof unsteady rolling stages and the rolling speed is continuously changed in this stage. In the high-speed cold rollingprocess of one steel company,there were some seriousdefects of strip shape during the over weld rolling stage.To solve this problem,the paper analyzes some typical processes by selecting several different rolling speeds in the over weld rolling stage considering the actual situation of the scene,and finds the impact of rolling speed and bending force on the strip shape.What’s more, the paper puts forward the bending force compensation control strategy for improvingthe quality of strip shape in theunsteady rolling stage,which provides the basis for controllingstr